
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X100ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 100mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X100ST is a double-acting JIS compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduce axial mounting depth compared to traditional round-body units, saving valuable machine footprint in tight assemblies. The integrated -S piston magnet interfaces seamlessly with AirTAC reed or electronic switches via the sensor grooves molded around the barrel.
This 63 mm bore unit features a 20 mm piston rod with a default female M10x1.5 thread end and a NPT1/4 port. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed operations may require external shock absorbers to mitigate impact energy. The hard-anodized inner bore ensures long service life across its 30-500 mm/s speed range. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X100ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 1558.6 N clamping force to secure heavy cast iron engine blocks during high-speed CNC machining operations.
Actuates a heavy-duty routing gate on a packaging conveyor, utilizing its 100 mm stroke to redirect large shipping pallets smoothly.
Ejects stamped sheet metal parts from a hydraulic press bed, relying on the fixed NBR bumper to absorb the sudden end-of-stroke impact.
Selecting this 63 mm bore model provides a maximum push output of 318 kgf at 1.0 MPa. If your application requires slightly less force, the 50 mm bore variant offers 981.8 N of push at 0.5 MPa; stepping up to the 80 mm bore yields 2513.2 N at 0.5 MPa. Keep in mind that a standard ACQ cylinder does not hold its position if air pressure drops or the valve is centered—the piston will drift, as the fixed bumper only decelerates near the end of travel. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
When ordering, confirm the essentials: 63 mm bore, 100 mm stroke, NPT1/4 port, the built-in magnet (S), and the female M10x1.5 rod thread. Ensure side loading is minimized to protect the compact rod assembly.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which is not field-adjustable. It also does not function as a rod lock; if air is lost, the piston will drift. For high-speed cycling, add an external shock absorber, and use a pilot-operated check valve if position holding is required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.