
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X100T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 100mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X100T is a double-acting JIS compact cylinder featuring a 63mm bore and 100mm stroke, delivering 1558.6 N of push force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to standard round-body units, saving valuable machine footprint space.
This model uses a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion, meaning high-speed applications may require external shock absorbers. The Ø20 mm piston rod features a female M10x1.5 thread, and while the body includes sensor grooves, this specific unit ships without a magnet for position sensing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X100T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates the clamp mechanisms on horizontal machining center pallet pools, using its 1558.6 N push force to secure heavy fixture plates.
Drives the folding arms on high-speed carton erectors, relying on the 100mm stroke to clear the packaging path during retraction.
Provides secondary knockout force for large plastic injection molds, utilizing the fixed NBR bumper to dampen the ejection shock.
Stepping down, the Ø50 bore provides 981.8 N of push force at 0.5 MPa, whereas stepping up to the Ø80 bore yields 2513.2 N, allowing you to scale your drive force precisely. Remember that a plain ACQ cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; maintaining vertical loads requires an external rod lock or pilot-operated check valve. To order this exact unit, confirm the 63mm bore, 100mm stroke, NPT1/4 port, female rod thread, and no magnet.
Quick checklist
At 0.5 MPa, this 63mm bore cylinder provides 1558.6 N of push force and 1401.5 N of pull force. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, and speed ranges from 30-500 mm/s.
No, the ACQ63X100T uses a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than a field-adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.