
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X10BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 10mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X10BT is a double-acting JIS compact cylinder engineered for a 63mm bore and a 10mm stroke. It delivers a robust 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, utilizing a male M18x1.5 threaded rod end to couple directly to your mechanism. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to round-body alternatives, saving valuable machine footprint.
This specific configuration includes the B-option male-thread piston rod and uses a NPT1/4 port. Deceleration at both stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning external shock absorbers should be added for high-energy impacts. The body retains integrated magnetic-switch grooves, though this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X10BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides high 1558.6 N push force for locking small to medium injection mold halves securely in place during the plastic injection cycle.
Drives the short 10mm stroke to open and close pneumatic bar pullers on CNC turning centers, using the male M18x1.5 thread for solid mounting.
Folds heavy cardboard flaps on automated packaging lines where the compact body depth prevents interference with high-speed product flow.
When sizing this 63mm bore actuator, evaluate your force requirements against neighboring options. Stepping down to the 50mm bore yields 981.8 N of push force at 0.5 MPa, while stepping up to the 80mm bore provides 2513.2 N. The ACQ63X10BT itself provides 1558.6 N push at 0.5 MPa and reaches a maximum standard stroke of 100mm within this same body size. Keep in mind that a standard compact cylinder will not hold a load if air pressure drops or the valve is centered; the piston will drift and the fixed bumper only decelerates it near the end of travel. For fail-safe positioning, an external rod lock or pilot-operated check valve is required. To order, confirm the 63mm bore, 10mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
It features a male-thread piston rod end (M18x1.5) for direct load coupling. It does not have an adjustable air cushion; instead, it uses a fixed NBR elastomer bumper at each end to absorb the impact. For high-speed applications, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.