
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X15BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 15mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X15BT is a double-acting JIS compact cylinder engineered for space-constrained machinery. Its short C-clip and riveted body design drastically reduce axial mounting depth compared to conventional round-body units, yielding a highly efficient footprint for a 63 mm bore. Delivering 1558.6 N of push force at 0.5 MPa, it is built for robust actuation tasks.
This specific configuration features a male M18x1.5 thread on the Ø20 mm piston rod for direct, secure coupling to your tooling. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption. The body includes sensor grooves, though this unit ships without a magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X15BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures lower mold halves in mid-sized plastic injection machinery where short overall length prevents frame interference.
Drives a heavy-duty diverter mechanism on packaging conveyor lines, utilizing the male rod thread for rigid linkage.
Positions secondary tooling arrays on machining centers, relying on the 1558.6 N extend force to overcome spindle drag.
When sizing this 63 mm bore actuator, compare its 1558.6 N push at 0.5 MPa against the smaller 50 mm bore (981.8 N push) for lighter duties, or step up to the 80 mm bore (2513.2 N push) if your mechanism demands greater thrust. Keep in mind that a standard ACQ body will not hold a load if air pressure drops or the valve centers; the rod drifts, and the fixed NBR bumper only softens the end-of-stroke impact. For fail-safe positioning, an external rod lock or pilot-operated check valve is required. To order this exact unit, confirm the 63 mm bore, 15 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at the 1.0 MPa operating pressure limit.
No, the ACQ63X15BT uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not a field-adjustable air cushion, so high-speed or high-energy cycles may require slowing the approach or adding an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.