
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X15SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 15mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X15SBT is a double-acting JIS compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduce axial mounting depth compared to traditional round-body units, saving valuable machine footprint in tight spaces.
This specific configuration includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches, and a male M18x1.5 threaded rod end (-B) for direct load coupling. The 63 mm bore uses a NPT1/4 port and relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X15SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the high clamping thrust needed to secure heavy steel bar material in a CNC lathe chuck, utilizing the male M18x1.5 rod for a rigid, direct thread-on connection to the lever mechanism.
Drives the upper sealing bar of an industrial case erector, applying 1558.6 N of force at 0.5 MPa to fold and secure heavy corrugated flaps on high-speed packaging lines.
Acts as a compact knockout ram for an injection molding machine, fitting into a shallow mold base to eject dense plastic parts without requiring excessive axial cavity depth.
For sizing context, stepping down to the 50 mm bore yields 981.8 N of push force at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N. The 63 mm bore is ideal when you need roughly 1.5 kN of thrust within a minimal axial envelope. Note that a plain compact cylinder drifts when air is lost or the valve is centered; the fixed NBR bumper only decelerates the piston near the stroke end and does not lock the load. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
When ordering this model, confirm the 63 mm bore, 15 mm stroke, NPT1/4 port, built-in magnet (S), and male M18x1.5 piston rod thread (B).
Quick checklist
The 63 mm bore generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, and 2182 N push at 0.7 MPa, with a maximum push of 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
There is no adjustable air cushion; it uses a fixed NBR elastomer bumper at each end to absorb impact. For high-energy cycles, slow the approach or add an external shock absorber. The -S magnet allows position detection using any AirTAC reed or electronic switch mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.