
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X15ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 15mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X15ST is a double-acting JIS compact cylinder engineered for substantial force in tight axial spaces. Its short C-clip and riveted body construction significantly reduces overall length compared to round-body units, saving valuable machine footprint. At 63 mm bore, it generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa.
This specific configuration includes the S option, meaning a built-in piston magnet enables position sensing via AirTAC reed or electronic switches housed in the body's peripheral grooves. The unit relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion, and its 20 mm piston rod features a standard female M10x1.5 thread for direct load coupling. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X15ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N push force necessary to securely clamp and hold corrugated cardboard cartons during the automated erecting and sealing process.
Handles heavy product routing on conveyor lines by extending rapidly to push loaded pallets onto branching transfer tracks without stalling.
Actuates lower dies or heavy tooling assemblies in metal forming presses, utilizing the short 15 mm stroke for rapid, high-force positioning cycles.
When sizing this 63 mm bore model, consider stepping down to the 50 mm bore (981.8 N push at 0.5 MPa) for lighter duties, or up to the 80 mm bore (2513.2 N push at 0.5 MPa) if your application requires greater thrust. Remember that a plain ACQ cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; achieving fail-safe positioning requires adding an external rod lock or a pilot-operated check valve. To order this unit correctly, confirm the 63 mm bore, 15 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the required S magnet option.
Quick checklist
The 63 mm bore generates a push force of 1558.6 N and a pull force of 1401.5 N at 0.5 MPa, reaching 2182 N push at 0.7 MPa, with a maximum push capacity of 318 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa, and piston speed ranges from 30-500 mm/s.
No, the ACQ63X15ST uses a fixed NBR elastomer bumper at each end to decelerate the piston near the stroke limits, which is not field-adjustable. For high kinetic energy loads, you should slow the approach speed or mount an external shock absorber to prevent end-cap damage.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.