
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X15T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 15mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X15T is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It provides 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, extending to 2182 N push at 0.7 MPa. The integrated C-clip and riveted piston-to-rod assembly drastically reduce overall length compared to standard round-body units, making it ideal for machinery where mounting depth is restricted.
This specific configuration features a 63 mm bore, a 15 mm stroke, and a NPT1/4 port. The piston rod measures 20 mm in diameter and terminates in a standard female M10x1.5 thread. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed operations may require an external shock absorber to mitigate impact energy. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X15T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 1558.6 N push force to eject dense plastic parts from injection molding tools where machine headroom is strictly limited.
Drives a sealing head with 1401.5 N pull force on packaging lines, utilizing the compact 15 mm stroke to maintain a narrow equipment profile.
Indexes sheet metal workpieces into a stamping press, taking advantage of the short C-clip body to minimize axial length in tight conveyor footprints.
When sizing this actuator, consider stepping down to the 50 mm bore if your application requires less force, as it yields 981.8 N of push at 0.5 MPa. Conversely, if you need greater thrust, the 80 mm bore provides 2513.2 N of push at 0.5 MPa. Both alternatives operate at the standard 30-500 mm/s speed range. To finalize your ACQ63X15T order, confirm the 15 mm stroke, NPT1/4 port, and the default female M10x1.5 rod end.
Remember that this double-acting cylinder does not inherently hold its position if air pressure drops or the directional valve is centered. The piston will drift, and the fixed NBR bumper only decelerates the rod near the end of its travel rather than locking it. If your application demands fail-safe load holding, incorporate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
The ACQ63X15T generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, and 2182 N push at 0.7 MPa. The maximum push force is 318 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa pressure, handles temperatures from -20 to +70 C, and has a speed range of 30-500 mm/s.
No, the ACQ63X15T uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not an adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.