
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X20BCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 20mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X20BCBT is a double-acting JIS compact cylinder engineered for substantial force in tight axial footprints. By utilizing a C-clip and riveted piston-to-rod assembly rather than a long tie-rod format, the overall body length is drastically reduced. At 0.5 MPa, this 63 mm bore generates 1558.6 N of push force and 1401.5 N of pull force, extending to 2182 N of push at 0.7 MPa.
This specific configuration ships with a male M18x1.5 thread on the Ø20 mm piston rod for direct load coupling, alongside a CB mounting bracket. Instead of an adjustable air cushion, it relies on fixed NBR elastomer bumpers at the stroke endpoints to absorb end-stop impact. The barrel features integrated sensor grooves, though this particular unit omits the internal magnet. For high kinetic energy cycles, operators should slow the approach speed or mount an external shock absorber. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X20BCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Supplies the 1558.6 N of push force at 0.5 MPa required to knock finished plastic parts off injection mold cores, utilizing the male M18x1.5 thread for secure ejector pin coupling.
Drives heavy-duty pneumatic pop-up transfer gates on logistics sorting lines, where the short 20 mm stroke and CB bracket mount provide rapid localized diversion without excessive axial depth.
Actuates heavy gauge material feeders and strip straighteners in stamping press lines, delivering robust 1401.5 N of retract force to reset the feeding carriage rapidly at 30-500 mm/s.
When sizing this 63 mm bore actuator, evaluate the adjacent standard bores for your force requirements. Stepping down, the 50 mm bore yields 981.8 N of push at 0.5 MPa; stepping up, the 80 mm bore provides 2513.2 N. This ACQ63X20BCBT variant is explicitly configured with a male-thread M18x1.5 rod end, a NPT1/4 port, and a CB mounting bracket. Ensure your load is axially aligned to prevent side-loading damage to the compact rod.
Remember that a standard double-acting cylinder of this type does not inherently secure its load. If pneumatic pressure drops or the control valve centers, the piston will drift, and the NBR bumper only decelerates the rod near the stroke limits rather than locking it. To maintain vertical or suspended loads safely during an air failure, incorporate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
This 63 mm bore double-acting cylinder delivers 1558.6 N of push and 1401.5 N of pull at 0.5 MPa, and 2182 N of push at 0.7 MPa. The maximum push force is 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and has a speed range of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at both ends to absorb end-stop impact; it is not equipped with an adjustable air cushion. Additionally, the cylinder does not lock or hold its load if air pressure is lost or the valve is centered, so an external rod lock or pilot-operated check valve is required for fail-safe position holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.