
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X20BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 20mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X20BT is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial envelope. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, utilizing a 63 mm bore and a 20 mm stroke. The short C-clip and riveted body design significantly reduces mounting depth compared to round-body alternatives, making it ideal for tight machinery footprints.
This specific configuration includes a male-thread piston rod end (M18x1.5) for direct load coupling, alongside a NPT1/4 port. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed operations may require external shock absorption. The body retains sensor grooves, though this unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X20BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 1558.6 N of extend force to secure heavy cast iron engine blocks during CNC milling operations, using the male M18x1.5 thread for a solid mechanical link.
Actuates a routing flap on a 50 kg logistics conveyor line, pushing loads smoothly within the 30-500 mm/s operational speed window.
Drives a sealing head down onto large corrugated boxes, where the fixed NBR bumper absorbs the end-stop impact without requiring complex adjustment.
When sizing your pneumatic drive, consider stepping down to the 50 mm bore for 981.8 N push at 0.5 MPa, or up to the 80 mm bore for 2513.2 N push if your application requires heavier force. To finalize your ACQ63X20BT order, confirm the 63 mm bore, 20 mm stroke, NPT1/4 port, and the male M18x1.5 rod thread.
Note that a standard ACQ body will drift if air pressure is lost or the valve is centered, as the NBR bumper only decelerates the piston near the end of travel without locking it. If your process demands fail-safe position holding under load, incorporate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
This 63 mm bore cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa with a speed range of 30-500 mm/s.
This specific unit ships without a magnet, though the body features grooves for AirTAC reed or electronic switches. It uses a fixed NBR elastomer bumper at each end for deceleration rather than a field-adjustable air cushion, so high-energy cycles may need external shock absorbers.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.