
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X20SBCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 20mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X20SBCBT is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It delivers a push force of 1558.6 N and a pull force of 1401.5 N at 0.5 MPa, utilizing a 63 mm bore and a 20 mm stroke. The C-clip and riveted piston-to-rod assembly shortens the overall body length compared to standard round-body alternatives.
This specific configuration includes a built-in piston magnet (-S) for position sensing, a male M18x1.5 threaded rod end (-B) for direct load coupling, and a CB clevis bracket for pivoting mount setups. Deceleration is handled by fixed NBR elastomer bumpers at both ends rather than adjustable air cushions, and the NPT1/4 port manages air supply. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X20SBCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives short-stroke ejector pins on a 63 mm bore injection molding press, utilizing the 1558.6 N extend force to break plastic parts free from the cavity.
Executes 20 mm pressing strokes on small metal components, where the male M18x1.5 rod threads directly into the upper tooling die for secure transfer of 2182 N at 0.7 MPa.
Actuates a heavy pivoting flap on a pallet dispenser machine using the CB clevis bracket, allowing the compact body to swing freely while managing heavy cardboard feed.
When sizing this 63 mm bore actuator, stepping down to a 50 mm bore yields 981.8 N of push force at 0.5 MPa, while stepping up to an 80 mm bore provides 2513.2 N. The 20 mm stroke is well within the 100 mm maximum standard stroke limit for this bore size. Confirm your ordering essentials: 63 mm bore, 20 mm stroke, NPT1/4 port, male M18x1.5 rod thread, CB mounting bracket, and the integrated magnet for switches.
Note that a standard double-acting cylinder of this type will not hold a load if air pressure drops or the directional valve is centered; the piston will drift. If your application demands fail-safe load holding, incorporate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This 63 mm bore cylinder generates a push force of 1558.6 N and a pull force of 1401.5 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, with an operating speed of 30-500 mm/s.
It relies on fixed NBR elastomer bumpers at both ends to absorb impact, which are not field-adjustable; for high-energy cycles, use an external shock absorber. The integrated magnet works with AirTAC reed or electronic switches fitted into the body grooves for position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.