
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X20SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 20mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X20SBT is a double-acting JIS compact cylinder engineered for substantial force in tight axial envelopes. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. The short C-clip and riveted piston-to-rod body architecture drastically reduces mounting depth compared to round-body alternatives, optimizing machine footprint.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male M18x1.5 threaded rod end (-B) for direct load coupling. The Ø20 mm piston rod is driven through a hard-anodized bore, and end-stop energy is managed by fixed NBR elastomer bumpers rather than adjustable cushions. A NPT1/4 port supplies the air line. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X20SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 1558.6 N of extension force to secure injection mold inserts within a tight tooling platen, utilizing the short 20 mm stroke and male rod thread for rigid mounting.
Actuates a routing gate on a high-speed logistics conveyor, using the integrated magnet to confirm gate position via solid-state sensors before product arrival.
Delivers rapid 1401.5 N retraction force to tension and seal steel strapping around heavy pallets, where the compact body depth conserves valuable end-of-line floor space.
When sizing this 63 mm bore actuator, evaluate your force trajectory: the 50 mm bore steps down to 981.8 N push, while the 80 mm bore steps up to 2513.2 N push at 0.5 MPa. Remember that a standard ACQ body does not hold position if air pressure drops or the valve centers; the rod drifts, and the fixed bumper only decelerates near stroke end. For fail-safe load holding, specify an external rod lock or pilot-operated check valve.
To order this exact unit, confirm the 63 mm bore, 20 mm stroke, NPT1/4 port, the -S magnet for reed or electronic switches, and the -B male M18x1.5 rod thread. Ensure your layout avoids side loading on the compact rod to prevent premature seal wear.
Quick checklist
This 63 mm bore double-acting cylinder delivers 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push force of 318 kgf at 1.0 MPa. The operational speed range is 30-500 mm/s.
It features a male M18x1.5 threaded piston rod for direct load coupling. Instead of an adjustable air cushion, it uses fixed NBR elastomer bumpers at both ends to absorb end-stop impact; for high-energy cycles, slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.