
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X20ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 20mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X20ST is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body, drastically reducing axial mounting depth where a conventional round-body unit would not fit. It yields 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, driven through a 20 mm stroke.
This variant includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches fitted into the body grooves. Deceleration relies on a fixed NBR elastomer bumper at each end, meaning it is not a field-adjustable air cushion; operators should slow the approach or utilize external shock absorbers for high-energy loads. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X20ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides compact ejection force for plastic injection molding machines, utilizing its short stroke to knock finished parts clear of the mold cavity without consuming excessive machine depth.
Drives the mechanical folding arms on automated case erecting lines, using the 1558.6 N extend force to reliably tuck heavy cardboard flaps prior to adhesive application.
Actuates heavy-duty routing gates on pallet conveyor systems, shifting full unit loads onto secondary packaging tracks within tight transfer station footprints.
When sizing your actuator, stepping down to the 50 mm bore yields 981.8 N push at 0.5 MPa, whereas stepping up to the 80 mm bore provides 2513.2 N. This 63 mm model strikes a strong middle ground for mid-tier workloads. To confirm your ordering essentials: 63 mm bore, 20 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the built-in magnet. Note that a plain ACQ cylinder will not hold a load if air pressure drops or the valve is centred; the rod drifts and the fixed bumper only decelerates near the stroke end. For fail-safe holding, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The 63 mm bore generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, runs at 30-500 mm/s, and tolerates temperatures from -20 to +70 C.
Yes, the -S suffix indicates a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches housed in the body grooves. Cushioning is handled by a fixed NBR elastomer bumper at each end, not an adjustable air cushion, so high-speed applications may require external shock absorption.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.