
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X25BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 25mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X25BT is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It delivers a push force of 1558.6 N and a pull force of 1401.5 N at 0.5 MPa, providing robust actuation for demanding equipment. The short C-clip and riveted body design significantly reduces overall length compared to standard round-body alternatives, saving valuable machine space.
This specific configuration includes a male M18x1.5 piston rod thread (indicated by the B suffix) for direct, secure load coupling, alongside a NPT1/4 port. Deceleration at stroke ends is handled by fixed NBR elastomer bumpers rather than adjustable air cushions, meaning high-speed operations may require external shock absorption. The body retains magnetic switch grooves, though this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X25BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives ejection pins in plastic injection molding machines where the male M18x1.5 rod threads directly into the ejector plate, utilizing the 1558.6 N push force to break parts free.
Actuates heavy-duty gripper feeds in metal stamping lines, relying on the short body to fit between press stations while handling substantial lateral payloads.
Pushes empty pallets into high-speed packaging conveyors, using the 25 mm stroke to index loads rapidly without consuming excessive floor space.
Selecting this 63 mm bore model makes sense when your application requires substantial force in a tight envelope. If you need slightly less thrust, the 50 mm bore offers 981.8 N of push force at 0.5 MPa; stepping up to the 80 mm bore yields 2513.2 N. Keep in mind that a standard ACQ cylinder will drift and lose its position if air pressure drops or the valve is centered, as the fixed bumper only decelerates the piston near the end of travel and does not act as a locking device. For fail-safe holding, an external rod lock or pilot-operated check valve is necessary.
When ordering, confirm this exact configuration: a 63 mm bore, 25 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no internal sensor magnet. The standard stroke limit for this bore is 100 mm, making the 25 mm stroke well within the optimal compact operating range.
Quick checklist
This double-acting cylinder generates a push force of 1558.6 N and a pull force of 1401.5 N at 0.5 MPa, with a push force of 2182 N at 0.7 MPa. The maximum push force is 318 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, with a speed range of 30-500 mm/s and a temperature tolerance of -20 to +70 C.
It uses fixed NBR elastomer bumpers at both ends to absorb impact, which are not field-adjustable like an air cushion; for high-energy cycles, slow the approach or add external shock absorbers. Additionally, it cannot hold a load on air loss or valve centering—the piston will drift, so an external rod lock is required for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.