
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X25SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 25mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X25SBT is a double-acting JIS compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to round-body alternatives, making it highly effective for machinery where space footprint is critical.
This specific configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic solid-state switches via the body's peripheral grooves. It also features a male-thread piston rod end (-B) sized at M18x1.5 for direct load coupling. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, so external shock absorbers should be added for high-energy cycles. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X25SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 1558.6 N push force to eject dense plastic parts from injection molding dies where axial depth is strictly limited.
Utilizes the male M18x1.5 rod thread to securely attach a squaring bar that aligns heavy cardboard cases before pallet wrapping.
Actuates upper press brake tooling with reliable force, using the integrated magnet to confirm stroke endpoints for safety interlocks.
When sizing this 63mm bore model, stepping down to a 50mm bore yields 981.8 N of push force at 0.5 MPa, while stepping up to an 80mm bore provides 2513.2 N. The ACQ63X25SBT operates at 30-500 mm/s and uses a NPT1/4 port. Remember that a plain compact cylinder drifts when air pressure is lost or a valve is centered; the fixed NBR bumper only decelerates the stroke end and does not lock the load. For fail-safe position holding, integrate an external rod lock or a pilot-operated check valve.
To order, confirm the essentials: 63mm bore, 25mm stroke, NPT1/4 port, the -S magnet for sensing, and the -B male M18x1.5 rod thread. The 20mm piston rod should be aligned carefully to avoid side loading, which can damage the compact body.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The standard stroke limit for this 63mm bore is 100mm.
It uses a fixed NBR elastomer bumper at each end to absorb the stop impact; it is not an adjustable air cushion. If your cycle speed or energy is high, add an external shock absorber. It does not hold its load on air loss—the rod drifts, so an external rod lock is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.