
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X25SLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 25mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X25SLBT is a double-acting JIS compact cylinder engineered around a short C-clip and riveted body, significantly reducing axial mounting depth where a traditional round-body unit would not fit. At 63 mm bore, it generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, making it highly effective for medium-duty industrial positioning.
This specific configuration includes an integrated piston magnet (-S) for use with AirTAC reed or electronic switches via the body’s circumferential sensor grooves. It features a male-thread piston rod end (M18x1.5) for secure mechanical coupling, a NPT1/4 port, and an LB mounting bracket for rigid lateral attachment. End-of-travel deceleration is handled by fixed NBR elastomer bumpers rather than adjustable cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X25SLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 1558.6 N of extend force to lock heavy cast iron workpieces onto machining centers, utilizing the male M18x1.5 rod thread for rigid fixture linkage.
Transfers filled cardboard shipping cases off a roller conveyor at up to 500 mm/s, relying on the LB bracket to resist lateral offset loads during the stroke.
Acts as a compact mold ejector where axial space is tight, using the integrated magnet and solid-state switch to confirm part ejection before the press closes.
When sizing this 63 mm bore unit, stepping down to a 50 mm bore yields 981.8 N of push at 0.5 MPa, while stepping up to an 80 mm bore provides 2513.2 N. The 63 mm bore hits a sweet spot for mid-range force requirements. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centred; the rod will drift, and the fixed bumper only decelerates the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
To order this exact unit, confirm the 63 mm bore, 25 mm stroke, NPT1/4 port, S magnet option, male M18x1.5 rod thread, and LB mounting bracket interface.
Quick checklist
At 0.5 MPa, this 63 mm bore double-acting cylinder provides 1558.6 N of push (extend) force and 1401.5 N of pull (retract) force. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, and speed ranges from 30-500 mm/s.
No, the ACQ63X25SLBT uses fixed NBR elastomer bumpers at both stroke ends rather than adjustable air cushions. For high kinetic energy or fast cycle speeds, you should slow the approach speed via flow controls or add an external shock absorber to prevent end-cap damage.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.