
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X25ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 25mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X25ST is a double-acting JIS compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to traditional round-body units, saving valuable mounting depth within tight machine envelopes.
This 63mm bore variant features a 20mm piston rod, a NPT1/4 port, and a fixed NBR elastomer bumper at each end to absorb end-stop impact. Equipped with an -S piston magnet, the body includes peripheral grooves for direct mounting of AirTAC reed or electronic solid-state switches. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X25ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 1558.6 N push force to eject dense plastic automotive interior panels from large injection molds, utilizing the short stroke to minimize press footprint.
Drives a folding mechanism on high-speed case packers, where the compact 63mm body depth fits neatly between conveyor lanes and the NBR bumper manages rapid cycling.
Feeds heavy-gauge stainless steel blanks into a mechanical press, relying on the 20mm rod and female M10x1.5 thread to secure the pusher fixture without side load.
When sizing this model, consider stepping down to the 50mm bore (981.8 N push at 0.5 MPa) for lighter duties, or up to the 80mm bore (2513.2 N push at 0.5 MPa) for heavier loads. Remember that a standard ACQ body does not hold its position if air pressure drops or the valve is centered; the rod will drift. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order this exact unit, confirm the 63mm bore, 25mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the -S magnet option.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to decelerate the piston near the stroke limits. It is not a field-adjustable air cushion, nor is it a locking brake. For high-energy or high-speed cycles, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.