
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X30BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 30mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X30BT is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. By utilizing a C-clip and riveted piston-to-rod connection rather than a conventional tie-rod assembly, this thin body significantly reduces required mounting depth. It provides 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, making it well-suited for heavy-duty positioning tasks.
This specific configuration includes a male M18x1.5 thread on the Ø20 mm piston rod for direct, secure coupling to your tooling. The body features integrated grooves for magnetic switches, though this unit ships without the internal magnet. To manage end-stop impact, the cylinder relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, effectively absorbing shock without requiring manual tuning. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X30BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 1558.6 N push force to eject heavy plastic parts from injection molds, utilizing the male M18x1.5 thread for secure mold mounting.
Drives a mechanical clamp in a sheet metal stamping line, where the short C-clip body saves valuable axial space in tight machine layouts.
Applies downward pressure to compact and seal large shipping cartons on a palletizer, relying on the fixed NBR bumper to absorb the stop impact.
When sizing this actuator, consider stepping down to the Ø50 bore if your application requires less force, which yields 981.8 N of push at 0.5 MPa. Conversely, if you need greater thrust, the Ø80 bore provides 2513.2 N of push at 0.5 MPa. Keep in mind that a standard ACQ body does not hold its position or load when air pressure is lost or the valve is centered; the piston will drift, and the fixed NBR bumper only decelerates it near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required. To order, confirm the 63 mm bore, 30 mm stroke, NPT1/4 port, and the male-thread rod end.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No. It uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which is not field-adjustable. For high-energy cycles, you should slow the approach or add an external shock absorber. Additionally, it does not hold its load on air loss; the rod drifts, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.