
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X30SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 30mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X30SBT is a double-acting JIS compact cylinder engineered to deliver substantial force within a minimal axial footprint. Utilizing a C-clip and riveted piston-to-rod assembly, the short body design significantly reduces mounting depth compared to traditional round-body units. At 0.5 MPa, this 63 mm bore generates a 1558.6 N push and a 1401.5 N pull force.
This specific configuration includes an -S piston magnet for position sensing via AirTAC reed or electronic switches fitted into the body grooves, and a -B male M18x1.5 rod end for direct load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end. Because this is not an adjustable air cushion, high-energy cycles may require slowing the approach or adding an external shock absorber. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X30SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 1558.6 N push force to eject dense plastic components from injection molding tools, where the short body length preserves valuable mold-base space.
Drives a heavy-duty diverting arm on packaging conveyors, utilizing the 30 mm stroke and male M18x1.5 rod to quickly push loaded pallets onto side tracks.
Secures heavy cast iron blocks inside CNC machining centers, relying on the magnetic piston to confirm clamp engagement to the controller before cutting begins.
Selecting the ACQ63X30SBT means matching your force and spatial requirements accurately. If 1558.6 N of push at 0.5 MPa exceeds your needs, the adjacent 50 mm bore offers 981.8 N. Conversely, if your application demands more power, stepping up to the 80 mm bore yields 2513.2 N. Ensure your ordering essentials are correct: 63 mm bore, 30 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and a magnetic piston.
Keep in mind that a standard compact cylinder does not maintain its position upon loss of air supply or when the valve is centered. The rod will drift under load, as the fixed NBR bumper only decelerates the piston near the stroke ends rather than locking it. For fail-safe load holding, an external rod lock or pilot-operated check valve must be integrated into your pneumatic circuit.
Quick checklist
The 63 mm bore produces a push force of 1558.6 N and a pull force of 1401.5 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and uses a NPT1/4 port.
The -S code indicates a built-in piston magnet for use with AirTAC reed or electronic switches. End-of-stroke deceleration relies on a fixed NBR elastomer bumper, which is not field-adjustable. For high kinetic energy loads, you should externally slow the approach or install a shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.