
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X30ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 30mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X30ST is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial thrust in tight machine footprints. By utilizing a C-clip and riveted piston-to-rod joint, the overall axial length is drastically reduced compared to conventional round-body designs. At 0.5 MPa, this 63 mm bore generates 1558.6 N of extension force and 1401.5 N of retraction force, peaking at 2182 N when supplied with 0.7 MPa.
This specific configuration includes the S option, meaning a piston magnet is factory-installed for position sensing via AirTAC reed or electronic switches housed in the peripheral body slots. End-of-stroke deceleration relies on fixed NBR elastomer bumpers rather than adjustable pneumatic cushions, so operators should manage high kinetic energy externally or moderate the approach velocity within the 30-500 mm/s operating band. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X30ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Supplies the 1558.6 N extension force needed to push finished plastic parts off injection molding platens, fitting neatly into tight press cladding clearances.
Drives heavy cardboard flap folding mechanisms on automated palletizing lines where the 30 mm stroke delivers rapid, high-impact tucking without axial bulk.
Actuates heavy-duty bar feeder pushers and chuck loading mechanisms in CNC turning cells, using the built-in magnet to confirm part hand-off positions.
When sizing this 63 mm bore unit, evaluate your thrust envelope against neighboring standard diameters. Stepping down to a 50 mm bore drops the 0.5 MPa push force to 981.8 N, while scaling up to an 80 mm bore increases it to 2513.2 N. Remember that a standard double-acting cylinder like this relies on continuous air pressure to maintain position; if the valve centers or air supply drops, the rod will drift and the NBR bumper only absorbs the end impact rather than locking the load. For fail-safe vertical holding, specify an external rod lock or pilot-operated check valve. To order, confirm the 63 mm bore, 30 mm stroke, NPT1/4 porting, the S magnet provision, and the default female M10x1.5 rod-end thread.
Quick checklist
This 63 mm bore cylinder features a 20 mm piston rod, a NPT1/4 port, and a default female M10x1.5 rod-end thread. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, 2182 N of push force at 0.7 MPa, and reaches a maximum push of 318 kgf at 1.0 MPa.
It uses fixed NBR elastomer bumpers at both ends to absorb end-stop energy rather than an adjustable air cushion, requiring external shock absorption for high-speed loads. The included S magnet allows solid-state electronic or reed switches to track position via the integrated body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.