
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X30T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 30mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X30T is a double-acting, single-rod JIS compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its short C-clip and riveted body architecture significantly reduces axial mounting depth compared to standard round-body units, freeing up valuable machine footprint.
This 63mm bore unit features a 20mm piston rod, a NPT1/4 port, and a female M10x1.5 rod-end thread for straightforward load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not field-adjustable, so high-energy cycles may require an external shock absorber. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X30T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the bar feeder pusher or chuck loading arm in CNC lathes, utilizing the 1558.6 N extend force to insert heavy steel workpieces into the spindle.
Folds and seals heavy corrugated cardboard flaps on automated palletizing lines, where the 1401.5 N retract force securely tucks thick material.
Ejects dense plastic or metal injection-molded parts from the stationary platen, using the short 30mm stroke to clear the mold cavity quickly.
This 63mm bore provides 1558.6 N push at 0.5 MPa. If you need less force, step down to the 50mm bore offering 981.8 N, or step up to the 80mm bore providing 2513.2 N for heavier demands. Remember that a plain ACQ cylinder will drift and cannot hold a load if air pressure drops or the valve is centered; for fail-safe positioning, add an external rod lock or a pilot-operated check valve.
When requesting this unit, confirm the 63mm bore, 30mm stroke, NPT1/4 port, female M10x1.5 rod thread, and that no internal magnet is required for sensor tracking.
Quick checklist
At 0.5 MPa, the push (extend) force is 1558.6 N and the pull (retract) force is 1401.5 N. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, speed range is 30-500 mm/s, and proof pressure is 1.5 MPa.
Deceleration relies on a fixed NBR elastomer bumper at each end, which is not an adjustable air cushion. To detect position, the body has grooves for AirTAC reed or electronic switches, but this specific model ships without the internal magnet, so you would need to specify an -S option for sensor functionality.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.