
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X35BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 35mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X35BT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body, minimizing axial mounting depth where a round-body unit would not fit. It delivers 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, utilizing a 63 mm bore and 35 mm stroke.
This specific configuration includes the B option, providing a male M18x1.5 thread on the 20 mm piston rod for direct load coupling. The barrel features integrated sensor grooves, though this model ships without the internal magnet, and end-stop deceleration is handled by fixed NBR elastomer bumpers rather than adjustable cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X35BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N extension force needed to strip plastic parts from injection mold tooling, using the male M18x1.5 thread for a rigid ejector tie-rod interface.
Folds heavy cardboard flaps on high-speed case erecting lines, where the short JIS compact body saves axial depth and the NBR bumper absorbs the repetitive end-stop impact.
Actuates mechanical lift gates on automated palletizing stations, offering 1401.5 N of retraction force at 0.5 MPa to pull heavy linkage arms out of the conveyor path.
When sizing your drive, stepping down to the 50 mm bore yields 981.8 N of push at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N. To confirm the essentials for this ACQ63X35BT: it carries a 63 mm bore, 35 mm stroke, NPT1/4 port, and a male M18x1.5 rod end. Keep in mind a plain compact cylinder drifts when air pressure is lost or a valve is centered; the fixed NBR bumper only softens the end of travel rather than locking the rod. If your application requires fail-safe position holding, you must add an external rod lock or a pilot-operated check valve.
Quick checklist
This 63 mm bore double-acting cylinder generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa operating pressure.
No. This model uses fixed NBR elastomer bumpers at each end to decelerate the piston, not an adjustable air cushion. It also lacks the internal magnet (no -S option), so while the body has sensor grooves, you would need a magnet-equipped variant to use reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.