verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ63X35ST

The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X35ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 35mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ63 mm
  • Stroke35 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM10×1.5 (F) / M18×1.5 (B)
  • ConfigurationStandard compact
$74.35 $81.85Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ63 stroke, mounting and version on one page All ACQ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ63X35ST

The AirTAC ACQ63X35ST is a double-acting JIS compact cylinder engineered to deliver a robust 1558.6 N push force at 0.5 MPa and 2182 N at 0.7 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length, saving valuable mounting depth where a conventional round-body unit would not fit.

This 63 mm bore variant incorporates a 20 mm piston rod, a NPT1/4 port, and a fixed NBR elastomer bumper at each end to absorb end-stop shock. Equipped with the -S option, it features a built-in magnet for AirTAC reed or electronic switches, allowing easy position sensing around its hard-anodized body. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ63X35ST Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ63X35ST
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ63 mm
Stroke35 mm
Acting typeDouble acting
Port sizePT1/4
Rod end threadM10×1.5 female / M18×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ63X35ST

ACQJIS compact (thin) double-acting cylinder series.
63Bore size in mm.
×35Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ63X35ST Is Used

factory

Injection Mold Ejection

Provides the 1558.6 N push force required to eject dense plastic parts from injection molding tools, utilizing its short body to fit within tight mold platen clearances.

package_2

Case Flapping Mechanism

Drives the folding arms on a carton sealing line, where the 35 mm stroke rapidly closes major flaps and the NBR bumper absorbs the high-speed end impact.

precision_manufacturing

CNC Lathe Door Latching

Secures the sliding safety door of a CNC turning center, using the integrated magnet to trigger a solid-state switch that confirms the door is locked before machining starts.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ63X35ST the Right Cylinder?

When sizing your actuator, stepping down to a 50 mm bore yields 981.8 N of push at 0.5 MPa, while stepping up to an 80 mm bore provides 2513.2 N. The ACQ63X35ST hits a solid middle ground for medium-force tasks. Confirm your ordering essentials: 63 mm bore, 35 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the -S magnet option.

Because this is a double-acting air cylinder, it will not hold a load if air pressure drops or the valve is centered; the piston drifts and the fixed bumper only decelerates near stroke end. To maintain a fail-safe position, incorporate an external rod lock or a pilot-operated check valve into your circuit.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ63X35ST FAQ

This 63 mm bore double-acting cylinder generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It uses a 20 mm rod, a NPT1/4 port, and operates at speeds of 30-500 mm/s.

No, the ACQ63X35ST uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not field-adjustable. For high kinetic energy loads, you should slow the approach speed or add an external shock absorber.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ63X35ST

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ63X35ST and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.