
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X35T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 35mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X35T is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. Its short C-clip and riveted body significantly reduce axial mounting depth compared to round-body alternatives. Delivering 1558.6 N of push force at 0.5 MPa, this 63mm bore unit is built for robust actuation.
This specific configuration features a 20mm piston rod with a female M10x1.5 thread end and a NPT1/4 port. It relies on a fixed NBR elastomer bumper at each stroke end to absorb impacts rather than an adjustable air cushion. The body includes standard magnetic-switch grooves, though this particular SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X35T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the high clamp force needed to fold and secure heavy corrugated cardboard flaps during automated case erecting lines.
Drives heavy-duty routing gates on roller conveyors to sort filled pallets into secondary packaging zones without axial footprint bloat.
Pushes robust stripper plates to eject dense plastic components from injection molding tools within a tight machinery envelope.
When sizing your pneumatics, consider stepping down to the 50mm bore for 981.8 N push at 0.5 MPa, or up to the 80mm bore for 2513.2 N if your application requires heavier thrust. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve centers; the rod will drift, and the fixed bumper only decelerates near the stroke end. For fail-safe positioning, an external rod lock or pilot-operated check valve is required. To order this exact unit, confirm the 63mm bore, 35mm stroke, NPT1/4 port, female rod thread, and no magnet.
Quick checklist
This 63mm bore cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at 30-500 mm/s with a NPT1/4 port.
No, it uses a fixed NBR elastomer bumper at each end, which is not an adjustable air cushion. For high-speed impacts, slow the approach or use an external shock absorber. It also does not hold position on air loss; you need an external rod lock for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.