
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X40BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 40mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X40BT is a double-acting JIS compact cylinder engineered to deliver a robust 1558.6 N push and 1401.5 N pull at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce axial length compared to round-body alternatives, saving valuable machine footprint in tight assemblies. This 63 mm bore unit features a NPT1/4 port and a 20 mm piston rod.
This specific configuration includes a male-thread rod end (M18x1.5) to couple directly to your load, alongside a fixed NBR elastomer bumper at each end to absorb end-stop energy. It is important to note this bumper is not an adjustable air cushion, so high-speed approaches may require external shock absorption. The body retains magnetic-switch grooves, though this model ships without the internal sensor magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X40BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N extension force needed to eject dense plastic parts from injection molding tools, utilizing the male M18x1.5 thread for secure mold coupling.
Drives the sealing head on automated packaging lines for large corrugated cartons, where the compact 40 mm stroke keeps the conveyor frame depth minimal.
Pushes bearings or bushings into machined housings on a transfer line, relying on the fixed NBR bumper to absorb the sudden stop at the end of the insertion stroke.
When sizing this 63 mm bore actuator, consider stepping down to the ACQ50, which provides 981.8 N of push force at 0.5 MPa, or moving up to the ACQ80 for a substantial 2513.2 N if your application demands higher thrust. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centered; the piston will drift, and the fixed bumper only decelerates it near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required.
To finalize your order, confirm the essentials: 63 mm bore, 40 mm stroke, NPT1/4 port, male M18x1.5 rod thread (B option), and no sensor magnet. The maximum standard stroke for this bore is 100 mm, with long-stroke variants available up to 300 mm.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, with a speed range of 30-500 mm/s and a proof pressure of 1.5 MPa.
No. It uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which is not a field-adjustable air cushion. Additionally, while the body features grooves for AirTAC reed or electronic switches, this specific model ships without the internal magnet required for them to function.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.