
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X40SBCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 40mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X40SBCBT is a double-acting single-rod JIS compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its short C-clip and riveted body construction significantly reduces axial mounting depth compared to standard round-body cylinders, making it highly effective for machinery where space is restricted.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, a male M18x1.5 threaded rod end for direct load coupling, and a CB mounting bracket interface. The hard-anodized 63mm bore operates on a NPT1/4 port, utilizing fixed NBR elastomer bumpers at each end to absorb end-stop impact rather than adjustable air cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X40SBCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 1558.6 N of extend force at 0.5 MPa to securely lock heavy cast iron workpieces onto machining centers.
Utilizes the 40mm stroke and male M18x1.5 thread to drive folding mechanisms on continuous corrugated box sealing lines.
Employs the CB mount and integrated magnet to verify retracted position before ejecting plastic parts from molding presses.
When sizing this 63mm bore model, consider stepping down to the 50mm bore for lighter loads, which yields 981.8 N of push at 0.5 MPa, or stepping up to the 80mm bore for heavier demands, providing 2513.2 N of push at 0.5 MPa. The ACQ63X40SBCBT is specifically configured with a 40mm stroke, a male M18x1.5 piston rod, a CB bracket, and a magnetic piston for position sensing.
Keep in mind that a plain compact cylinder does not hold its load if air pressure is lost or the valve is centered; the rod will drift, and the fixed NBR bumper only decelerates the piston near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. Furthermore, for high-speed operations, adding an external shock absorber is recommended since the bumper is not field-adjustable.
Quick checklist
The 63mm bore generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, with a maximum push of 318 kgf at 1.0 MPa. The standard stroke limit is 100mm, and the operational speed range is 30-500 mm/s.
It uses fixed NBR elastomer bumpers at each end to absorb impact, which are not adjustable air cushions. It does not inherently hold its load on air loss; the rod drifts, so an external rod lock is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.