
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X40ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 40mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X40ST is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial force in tight axial spaces. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, extending to 2182 N push at 0.7 MPa. Its short C-clip and riveted body design drastically reduces overall length compared to round-body alternatives, conserving valuable machine footprint depth.
This 63mm bore unit features a 20mm piston rod and a NPT1/4 port. Because it carries the -S option, a built-in piston magnet enables position sensing via AirTAC reed or electronic solid-state switches seated in the body grooves. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X40ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the high 1558.6 N push force required to secure heavy injection mold halves within a compact machine frame, utilizing the 40mm stroke for rapid opening and closing cycles.
Diverts heavy loaded pallets on a packaging conveyor line, where the 63mm bore delivers sufficient lateral force and the integrated -S magnet confirms the diverting arm position.
Drives the tailstock on a CNC lathe to seat long bar material, benefiting from the short JIS compact body depth to fit within the tight machining envelope while applying steady through-force.
When sizing this model, compare its 1558.6 N push @0.5 MPa against adjacent bores: the 50mm bore yields 981.8 N (lighter duty), while the 80mm bore provides 2513.2 N (heavier loads). To order this exact unit, confirm the 63mm bore, 40mm stroke, NPT1/4 port, female M10x1.5 rod thread, and the -S magnet option. Keep in mind a standard ACQ body does not hold its load if air pressure drops or the valve centers; the rod will drift. For fail-safe positioning, specify an external rod lock or a pilot-operated check valve.
Quick checklist
This 63mm bore double-acting cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates within a 0.15-1.0 MPa pressure range.
No, the ACQ63X40ST uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not an adjustable air cushion, so for high-speed or high-energy loads, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.