
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X45BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 45mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X45BT is a double-acting JIS compact cylinder engineered for tight axial mounting spaces, utilizing a C-clip and riveted piston-to-rod assembly to minimize overall length. It yields a push force of 1558.6 N and a pull force of 1401.5 N at 0.5 MPa, making it well-suited for medium-duty industrial handling.
This specific configuration includes a 20mm piston rod with a male M18x1.5 thread end for direct load coupling. The hard-anodized aluminum body incorporates fixed NBR elastomer bumpers at both ends to absorb end-stop impact, rather than utilizing an adjustable air cushion. While the body features integrated magnetic-switch grooves, this particular unit ships without a piston magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X45BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N push force needed to eject plastic parts from injection molding machines, where the short C-clip body conserves valuable machine envelope depth.
Drives heavy pallet diverting arms on packaging lines, utilizing the male M18x1.5 rod thread for a rigid coupling to the diverter linkage.
Actuates trimming stations in light press operations, relying on the fixed NBR bumpers to decelerate the 20mm rod at the end of the 45mm stroke.
When sizing this 63mm bore actuator, consider stepping down to the 50mm bore if your application requires less force, which provides 981.8 N of push at 0.5 MPa. If you need greater thrust, stepping up to the 80mm bore yields 2513.2 N at 0.5 MPa. To order this model correctly, confirm the 63mm bore, 45mm stroke, NPT1/4 port, male M18x1.5 rod thread, and the absence of a sensor magnet.
Because this is a standard double-acting cylinder, it will not hold a load in place if air pressure drops or the control valve is centered; the rod will drift. If your application requires fail-safe position holding, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at the stroke ends to absorb impact, not an adjustable air cushion. Additionally, it does not lock the load if air is lost; the rod will drift, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.