verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ63X45SBT

The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X45SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 45mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ63 mm
  • Stroke45 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM10×1.5 (F) / M18×1.5 (B)
  • ConfigurationStandard compact
$77.97 $85.47Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ63 stroke, mounting and version on one page All ACQ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ63X45SBT

The AirTAC ACQ63X45SBT is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, utilizing a 63 mm bore and a 45 mm stroke. The riveted piston-to-rod assembly and C-clip body construction significantly reduce overall length compared to standard round-body units, saving valuable machine mounting depth.

This specific configuration includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches along the body grooves, and a male-thread piston rod end (-B) sized at M18x1.5 for direct load coupling. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning operators should slow the approach or add external shock absorbers for high-energy loads. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ63X45SBT Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ63X45SBT
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ63 mm
Stroke45 mm
Acting typeDouble acting
Port sizePT1/4
Rod end threadM10×1.5 female / M18×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ63X45SBT

ACQJIS compact (thin) double-acting cylinder series.
63Bore size in mm.
×45Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ63X45SBT Is Used

precision_manufacturing

Injection Mold Ejection

Provides the 1558.6 N push force required to eject dense plastic parts from injection molding tools, with the male M18x1.5 rod threading directly into the ejector plate.

conveyor_belt

Pallet Diverting

Handles heavy pallets on a packaging line by extending 45 mm to actuate a diverting arm, relying on the compact C-clip body to fit within tight conveyor frame clearances.

factory

Press Die Clamping

Secures stamping dies in a mechanical press, utilizing the integrated magnet and electronic switches to verify clamp engagement before the press cycles.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ63X45SBT the Right Cylinder?

Selecting this 63 mm bore involves balancing your force requirements against the available space and neighbouring options. If you need slightly less thrust, the 50 mm bore offers 981.8 N of push at 0.5 MPa; stepping up to the 80 mm bore provides 2513.2 N. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve is centered—the piston will drift, as the fixed NBR bumper only decelerates the stroke near the end points. For fail-safe positioning, an external rod lock or pilot-operated check valve is required.

When ordering, confirm the essentials for this model: a 63 mm bore, 45 mm stroke, NPT1/4 port thread, the integrated magnet for sensing, and the male M18x1.5 rod thread. The 20 mm diameter piston rod is designed for inline thrust, so avoid imposing lateral side loads on this compact assembly.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ63X45SBT FAQ

At 0.5 MPa, this double-acting cylinder provides 1558.6 N of push force and 1401.5 N of pull force. At 0.7 MPa, the push force is 2182 N, and the maximum push force is 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.

It features a male-thread piston rod end (M18x1.5) for direct load coupling, but it does not have an adjustable air cushion. Instead, it uses a fixed NBR elastomer bumper at each end to absorb the impact. For high-speed or high-energy loads, you should slow the approach or install an external shock absorber.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ63X45SBT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ63X45SBT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.