
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X45ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 45mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X45ST is a double-acting JIS compact cylinder engineered for substantial thrust in tight axial envelopes. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, utilizing a 63 mm bore and a 45 mm stroke. The integrated C-clip and riveted piston-to-rod design drastically reduce overall length compared to round-body units, saving valuable machine footprint depth.
This unit includes the S option, meaning it has a built-in piston magnet ready for AirTAC magnetic reed or electronic solid-state switches housed in the body's peripheral grooves. The 20 mm piston rod features a standard female M10x1.5 thread end, and deceleration is handled by a fixed NBR elastomer bumper at each end stop rather than an adjustable air cushion. Fluid supply is routed through a NPT1/4 port, supporting an operating speed range of 30-500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X45ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Pulls machined plastic parts from injection molding dies where the short 45 mm stroke and 1401.5 N retract force clear the tooling without requiring deep machine cavities.
Drives carton sealing machine side flaps with 1558.6 N of push force, fitting neatly between conveyor guide rails due to the compact JIS body profile.
Indexes bar feeder material pushers in CNC turning centers, using the built-in S magnet to trigger electronic switches for precise material positioning.
When sizing this 63 mm bore actuator, consider stepping down to the 50 mm model if your load requires less energy, which yields 981.8 N of push at 0.5 MPa. If your application demands greater extension power, the next size up is the 80 mm bore, providing 2513.2 N of push at 0.5 MPa. Remember that a standard ACQ body will not hold a suspended load if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates near the stroke end. For fail-safe positioning, incorporate an external rod lock or a pilot-operated check valve.
To order this specific unit correctly, confirm the 63 mm bore, 45 mm stroke, NPT1/4 port thread, the S magnet option for sensor tracking, and the default female M10x1.5 rod-end thread.
Quick checklist
This 63 mm bore double-acting cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ63X45ST uses a fixed NBR elastomer bumper at each end to absorb the end stop impact. It is not a field-adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.