
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X45T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 45mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X45T is a double-acting JIS compact cylinder engineered to deliver robust thrust in tight axial envelopes. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, stepping up to 2182 N at 0.7 MPa. Built with a short C-clip and riveted piston-to-rod assembly, the unified body drastically reduces overall length compared to conventional round-body units, saving valuable machine footprint depth.
This 63 mm bore unit features a 20 mm piston rod and a NPT1/4 supply port. Deceleration at the stroke extremes relies on fixed NBR elastomer bumpers rather than an adjustable air cushion, meaning external shock absorbers should be added for high-energy cycles. The body includes integrated magnetic-switch grooves for position detection, though this specific configuration ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X45T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N of extend force needed to positively eject large automotive interior panels from machined molds during automated unloading.
Pushes heavy loaded pallets off a main transfer line onto a secondary packaging spur, utilizing the 45 mm stroke to clear the conveyor frame.
Transfers steel blanks into a heavy stamping press, where the compact C-clip body minimizes interference with the press bolster plates.
When sizing this 45 mm stroke actuator, stepping down to the 50 mm bore yields 981.8 N of push at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N. The 63 mm bore hits a sweet spot for medium-force clamping and lifting. To finalize your build, verify the 63 mm bore, 45 mm stroke, NPT1/4 port, female M10x1.5 rod-end thread, and the absence of a sensor magnet. Note that a standard ACQ body will drift and fail to hold a load if air pressure drops or the valve centers; a fail-safe position requires an external rod lock or pilot-operated check valve.
Quick checklist
The ACQ63X45T features a 63 mm bore and 45 mm stroke. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, reaching 2182 N of push at 0.7 MPa, with a maximum push capacity of 318 kgf at 1.0 MPa. The piston rod is 20 mm, the port is NPT1/4, and the female rod-end thread is M10x1.5.
It uses fixed NBR elastomer bumpers at each end to absorb shock, which are not adjustable like an air cushion; for high-speed cycling, you should add external shock absorbers. Additionally, it does not hold its position if air is lost or the valve is centered, so an external rod lock or pilot-operated check valve is required for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.