
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X50SBCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 50mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X50SBCBT is a double-acting JIS compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to round-body alternatives, conserving valuable machine footprint in tight assemblies.
This specific configuration includes a built-in piston magnet for positioning feedback via AirTAC reed or electronic switches, and a male M18x1.5 threaded rod end for direct load coupling. Deceleration is handled by fixed NBR elastomer bumpers at both ends rather than adjustable air cushions, meaning external shock absorbers should be added for high-energy stops. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X50SBCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Pushes heavy pallets onto secondary packaging lines using its 1558.6 N extend force, while the CB bracket secures the body against lateral shift during high-cycle transfers.
Strips finished plastic parts from injection molding tools, utilizing the male M18x1.5 rod end for a rigid mechanical connection to the gripper assembly.
Drives sealing heads against large corrugated cartons, relying on the integrated magnet to trigger electronic switches for precise stroke confirmation.
Selecting this 63mm bore involves sizing against adjacent options: stepping down to a 50mm bore yields 981.8 N push, while stepping up to an 80mm bore provides 2513.2 N push at 0.5 MPa. For this SBCB variant, confirm your ordering essentials: 63mm bore, 50mm stroke, NPT1/4 port, male M18x1.5 rod thread, sensor magnet, and CB mounting bracket.
Keep in mind that a standard ACQ body does not hold its position or load if air pressure drops or the valve is centered, as the rod will drift and the fixed NBR bumper only decelerates near the stroke end. If your application requires fail-safe load holding, an external rod lock or pilot-operated check valve must be integrated.
Quick checklist
This 63mm bore cylinder delivers 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa pressure, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses fixed NBR elastomer bumpers at the stroke ends rather than field-adjustable air cushions. Because the bumper only decelerates the piston near the end of travel and does not act as a brake, you should slow the approach speed or add external shock absorbers for high-energy loads.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.