
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X50SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 50mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X50SBT is a double-acting JIS compact cylinder engineered to deliver 1558.6 N of push force at 0.5 MPa (2182 N at 0.7 MPa) via a single 63mm piston. Its short C-clip and riveted body design drastically reduce axial mounting depth compared to round-body units, saving valuable machine footprint. The hard-anodized aluminum bore ensures long service life across millions of cycles.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male M18x1.5 threaded rod end (-B) for direct load coupling. The 20mm diameter piston rod extends 50mm, while the NPT1/4 air port handles the required flow. End-of-stroke deceleration is handled by fixed NBR elastomer bumpers rather than adjustable cushions, meaning high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X50SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 1558.6 N of extend force at 0.5 MPa to securely clamp heavy cast iron engine blocks during CNC milling operations.
Drives a 50mm stroke pressing head to fold and seal corrugated cardboard flaps on high-volume packaging lines.
Uses the male M18x1.5 rod thread to directly attach an ejection plate, breaking plastic parts loose from injection mold cavities.
When sizing this 63mm bore, stepping down to the 50mm bore yields 981.8 N of push force at 0.5 MPa, while stepping up to the 80mm bore provides 2513.2 N. The ACQ63X50SBT operates at 30-500 mm/s and requires a 0.15-1.0 MPa supply. To order, confirm the 63mm bore, 50mm stroke, NPT1/4 port, male M18x1.5 rod thread, and the integrated magnet.
Note that a standard compact cylinder does not inherently hold its position if air pressure drops or the control valve is centered; the rod will drift. The fixed NBR bumper only decelerates the piston near stroke end and acts as neither a lock nor a brake. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
At 0.5 MPa, push force is 1558.6 N and pull force is 1401.5 N. At 0.7 MPa, push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, the ACQ63X50SBT uses fixed NBR elastomer bumpers at each end of the stroke. It is not an adjustable air cushion. For high-speed or high-energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.