
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X50ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 50mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X50ST is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial thrust in tight machinery envelopes. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, utilizing a 63 mm bore and a 50 mm stroke. The integrated C-clip and riveted piston-to-rod assembly significantly reduce overall axial length compared to conventional round-body units, saving valuable mounting depth.
This specific configuration includes a built-in piston magnet (-S) for position sensing, compatible with AirTAC reed or electronic switches housed in the peripheral body grooves. End-of-travel energy is managed by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning operators should externally slow high-speed approaches or add external shock absorbers for heavy loads. The 20 mm piston rod features a standard female M10x1.5 thread end. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X50ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 1558.6 N push force to eject dense plastic automotive interior panels from heavy tooling within confined press envelopes.
Folds corrugated box flaps on high-speed end-of-line packaging systems where the 50 mm stroke and compact depth prevent interference with conveyor guides.
Secures heavy cast aluminum engine blocks during machining operations, utilizing the built-in magnet to confirm clamp engagement before cycle start.
When sizing this 63 mm bore actuator, buyers needing less force can step down to the 50 mm bore, which yields 981.8 N of push at 0.5 MPa. Conversely, applications requiring more thrust can step up to the 80 mm bore, providing 2513.2 N of push at 0.5 MPa. Remember that a standard ACQ body does not hold its position or load when air pressure is lost or the directional valve is centered; the rod will drift, and the fixed bumper only decelerates it near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
To finalize your order for this exact unit, confirm the 63 mm bore, 50 mm stroke, NPT1/4 port thread, the -S magnet option for sensing, and the default female M10x1.5 rod-end thread. The operating speed is 30-500 mm/s.
Quick checklist
This 63 mm bore cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not field-adjustable. It also does not function as a lock; if air is lost, the rod drifts, so an external rod lock or shock absorber is needed for fail-safe holding or high-energy deceleration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.