
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X50T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 50mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X50T is a double-acting JIS compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its integrated C-clip and riveted piston-to-rod assembly drastically reduce overall axial length, saving valuable mounting depth where a conventional round-body unit would be too deep. The 63 mm bore features a hard-anodized inner wall and a 20 mm piston rod with a female M10x1.5 thread end.
This model relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. Because this specific unit ships without a magnetic piston, the machined sensor grooves around the body remain available but require adding a magnet for switch activation. Operating at speeds of 30-500 mm/s, it uses a NPT1/4 port and handles operating pressures up to 1.0 MPa. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X50T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N extend force needed to positively eject heavy plastic automotive interior panels from a mold cavity within a tight machinery footprint.
Drives a mechanical arm to fold and tuck heavy corrugated cardboard flaps on a high-speed packaging line, relying on the 50 mm stroke for rapid cycling.
Actuates a diverter gate on a palletizing conveyor, moving loads vertically where the short C-clip body minimizes interference with passing product.
Selecting this 63 mm bore with a 50 mm stroke provides substantial thrust, but sizing your pneumatic system correctly means evaluating adjacent options. Stepping down to the 50 mm bore yields 981.8 N of push at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N. If your mechanism must maintain its position during a compressed air failure or when a directional valve is centered, note that a standard ACQ cylinder will drift; the fixed NBR bumper only decelerates the piston near the stroke end and does not act as a locking brake. For fail-safe holding, integrate an external rod lock or a pilot-operated check valve.
When requesting a quote, confirm the core ordering parameters: 63 mm bore, 50 mm stroke, NPT1/4 port thread, female M10x1.5 rod end, and no sensor magnet. You can specify a male M18x1.5 rod thread or add a magnet for position detection if your application evolves.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder generates 1558.6 N of push force and 1401.5 N of pull force. At 0.7 MPa, the push force increases to 2182 N, and the maximum push force is 318 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion, so you may need an external shock absorber for high-energy cycles. Additionally, it does not hold its position if air pressure is lost; the rod will drift, requiring an external rod lock or pilot-operated check valve for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.