
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X5BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 5mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X5BT is a double-acting JIS compact cylinder engineered for extreme space constraints, offering a 5 mm stroke on a 63 mm bore. By utilizing a C-clip and riveted piston-to-rod joint, the overall axial length is drastically reduced compared to round-body alternatives. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, making it highly effective for high-force clamping or pressing tasks in tight machine footprints.
This specific configuration includes the B option, providing a male-thread M18x1.5 piston rod end for direct, secure load coupling. The body features integrated grooves for mounting AirTAC magnetic switches, though this unit ships without the internal magnet. Deceleration at the stroke endpoints is handled by a fixed NBR elastomer bumper, which is not field-adjustable; for high-energy impacts, external shock absorption is recommended. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X5BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a short 5 mm knockout stroke to eject sheet metal blanks from progressive die sets using 1558.6 N of push force.
Applies high clamping pressure on small injection mold halves, utilizing the male M18x1.5 thread for rigid mold coupling.
Delivers rapid, short-throw folding pressure on heavy-duty corrugated carton flaps before the sealing head.
When sizing your pneumatic setup, compare this 63 mm bore against the adjacent options. Stepping down to the 50 mm bore yields 981.8 N of push force at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N. The ACQ63X5BT is optimal when you need the higher 1558.6 N force in a very short 5 mm stroke. Remember that a standard double-acting cylinder drifts when air pressure is removed or a valve is centered; if your application requires fail-safe load holding, incorporate an external rod lock or a pilot-operated check valve. To order, confirm the 63 mm bore, 5 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no magnet.
Quick checklist
The ACQ63X5BT generates a push force of 1558.6 N and a pull force of 1401.5 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N. The maximum allowable push force is 318 kgf at 1.0 MPa operating pressure.
Deceleration relies on a fixed NBR elastomer bumper at each end, which cannot be adjusted like an air cushion. Furthermore, the cylinder will not hold a load if air pressure is lost; it will drift, and the bumper only slows the piston near the stroke end. For fail-safe holding, an external rod lock is required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.