
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X5SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 5mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X5SBT is a double-acting JIS compact cylinder engineered for short-stroke clamping where axial depth is restricted. Its C-clip and riveted piston-to-rod architecture drastically reduces overall length compared to conventional round-body units. Delivering a robust 1558.6 N push at 0.5 MPa, this 63 mm bore actuator is built for high-force insertion tasks.
This specific configuration includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. The -B option provides a male M18x1.5 threaded rod end for straightforward mechanical coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not field-adjustable. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X5SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Ejects formed sheet metal parts from progressive dies using a brief 5 mm stroke, leveraging the 1558.6 N push force to break the part free.
Presses bearings into housings on an assembly line where the male M18x1.5 rod end threads directly into a custom pressing nose.
Acts as a rigid stop block to index heavy pallets, using the compact JIS body to fit within tight conveyor frame profiles.
Selecting this 63 mm bore with a 5 mm stroke suits high-impact pressing operations needing minimal extension. If you need slightly less force, the 50 mm bore yields 981.8 N push at 0.5 MPa; stepping up to the 80 mm bore provides 2513.2 N. Keep in mind a standard ACQ body will drift and cannot hold a load if air pressure drops, as the fixed bumper only absorbs end-of-travel kinetic energy rather than locking the rod.
When requesting a quote, verify the 63 mm bore, 5 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and the integrated magnet for switch mounting.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa with a speed of 30-500 mm/s.
It relies on a fixed NBR elastomer bumper at each end, which is not an adjustable air cushion, so high-speed approaches may need external shock absorption. The integrated magnet allows you to track position using AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.