
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X5ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 5mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X5ST is a double-acting JIS compact cylinder engineered for tight axial spaces. It produces 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, making it suitable for heavy-duty short-stroke tasks. The unitized C-clip and riveted piston-to-rod design drastically reduce overall length compared to round-body alternatives.
This specific configuration includes a built-in piston magnet (-S) for position sensing with AirTAC reed or electronic switches. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not field-adjustable. The 63 mm bore pairs a NPT1/4 port with a 20 mm diameter rod and a female M10x1.5 thread end. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X5ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a short 5 mm knockout stroke to eject dense plastic parts from injection molding tools where space behind the mold is highly restricted.
Delivers 1558.6 N of extend force to secure heavy workpieces against a machining fixture before a secondary milling or drilling operation begins.
Acts as a high-force short-stroke diverter to release empty pallets from a vertical magazine stack in high-speed end-of-line packaging lines.
When sizing your actuator, stepping down to the 50 mm bore yields 981.8 N of push at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N. The ACQ63X5ST is ideal when the 50 mm falls short but the 80 mm is physically too large. Remember that a standard compact cylinder will not hold a load if air pressure drops; the rod drifts and the fixed bumper only softens the end stop. For fail-safe positioning, add an external rod lock or pilot-operated check valve. To order, confirm the 63 mm bore, 5 mm stroke, NPT1/4 port, female M10x1.5 thread, and the S magnet option.
Quick checklist
At 0.5 MPa, this double-acting cylinder generates 1558.6 N of push force and 1401.5 N of pull force. At 0.7 MPa, the push force reaches 2182 N. The maximum push force is 318 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
No. The ACQ63X5ST uses fixed NBR elastomer bumpers at the stroke ends rather than an adjustable air cushion, so for high energy impacts you should add an external shock absorber. Additionally, it does not hold position if air is lost; an external rod lock is required for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.