verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ63X5T

The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X5T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 5mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ63 mm
  • Stroke5 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM10×1.5 (F) / M18×1.5 (B)
  • ConfigurationStandard compact
$51.09 $58.59Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ63 stroke, mounting and version on one page All ACQ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ63X5T

The AirTAC ACQ63X5T is a double-acting JIS compact air cylinder engineered for tight axial spaces, delivering 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its short C-clip and riveted body construction drastically reduces overall length compared to round-body alternatives, making it ideal for very short 5 mm stroke sequences. The Ø63 mm bore features a hard-anodized inner wall and a two-way piston seal for lasting pneumatic efficiency.

This specific configuration ships without a magnet, though the body retains peripheral grooves for adding AirTAC reed or electronic switches if needed later. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning external shock absorbers should be specified for high-energy impacts. The 20 mm piston rod utilizes a standard M10x1.5 female thread for direct load coupling. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ63X5T Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ63X5T
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ63 mm
Stroke5 mm
Acting typeDouble acting
Port sizePT1/4
Rod end threadM10×1.5 female / M18×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ63X5T

ACQJIS compact (thin) double-acting cylinder series.
63Bore size in mm.
×5Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ63X5T Is Used

precision_manufacturing

Injection Mold Ejection

Provides a rapid 5 mm knockout stroke to eject plastic parts from an injection molding die without consuming valuable mold base depth.

factory

Heavy Press Tonnage Stop

Acts as a short-travel mechanical stop in a metal stamping press line, using its 1558.6 N push capability to position heavy tooling plates.

package_2

Carton Flap Folding

Delivers a fast, low-profile folding action on a high-speed packaging line to tuck heavy corrugated carton flaps prior to sealing.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ63X5T the Right Cylinder?

Selecting this 63 mm bore with a 5 mm stroke provides substantial thrust in a minimal footprint. If your application requires less force, stepping down to the 50 mm bore yields 981.8 N of push at 0.5 MPa, while moving up to the 80 mm bore provides 2513.2 N for heavier demands. Ensure your ordering essentials are correct: 63 mm bore, 5 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and no sensor magnet.

Keep in mind that a standard ACQ body does not inherently hold its position or maintain load support if air pressure drops or the control valve is centered; the rod will drift. For fail-safe load holding in vertical or gravity-assisted setups, an external rod lock or a pilot-operated check valve is required.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ63X5T FAQ

The ACQ63X5T generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, and 2182 N of push force at 0.7 MPa. The maximum push force is 318 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-500 mm/s.

It uses a fixed NBR elastomer bumper at each end to absorb the stop, which is not a field-adjustable air cushion; for high cycle rates you may need external shock absorption. Additionally, it does not hold its load if air is lost or the valve is centered, requiring an external rod lock for fail-safe positioning.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ63X5T

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ63X5T and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.