
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X60BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 60mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X60BT is a double-acting JIS compact cylinder engineered to deliver a robust 1558.6 N push and 1401.5 N pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial footprint compared to traditional round-body units, making it highly effective for machinery where mounting depth is restricted. The bore features a hard-anodized inner wall for prolonged service life.
This specific configuration includes a male M18x1.5 piston rod thread (the B option) for direct mechanical coupling to your tooling. It uses a NPT1/4 port and relies on a fixed NBR elastomer bumper at each end to absorb end-stop energy. Because it lacks an adjustable air cushion, operators should utilize an external shock absorber or decelerate the approach for high-speed cycling. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X60BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives ejection pins in plastic injection molding machines where the male M18x1.5 rod end securely threads into the ejector plate to break parts free.
Folds heavy corrugated carton flaps on continuous packaging lines, utilizing the 1558.6 N extend force to overcome board stiffness.
Acts as a compact positioning cylinder on small metal press brakes, providing reliable holding force for sheet metal bending operations.
Selecting this 63 mm bore with a 60 mm stroke provides substantial power within a minimal axial envelope. If you need slightly less force, the adjacent 50 mm bore yields 981.8 N of push at 0.5 MPa; conversely, stepping up to the 80 mm bore provides 2513.2 N. Remember that a standard ACQ body does not maintain its position upon air loss or valve centering—the piston will drift, and the fixed bumper only decelerates near the stroke end, so an external rod lock or pilot-operated check valve is necessary for fail-safe holding.
When ordering, verify your requirements against this model's core attributes: 63 mm bore, 60 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no built-in sensor magnet.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.
No. It uses a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. Additionally, while the body retains sensor grooves, this specific model ships without a built-in magnet, so it cannot directly trigger AirTAC reed or electronic switches without modification.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.