
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X60SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 60mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X60SBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body, significantly reducing axial mounting depth compared to conventional round-body units. It delivers a robust 1558.6 N push force at 0.5 MPa, utilizing a 63 mm bore and 60 mm stroke for demanding operations.
This variant includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches, and a male M18x1.5 threaded rod end (-B) for direct load coupling. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable cushion, and the NPT1/4 port ensures adequate airflow for its 30-500 mm/s speed range. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X60SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N push force required to fold and seal heavy corrugated cardboard flaps on high-speed packaging lines.
Utilizes the male M18x1.5 rod end to securely thread into custom mold pullers, ejecting plastic parts from 200-ton presses.
Handles timber indexing and pressing tasks where the short 63 mm JIS body footprint prevents collision with adjacent router spindles.
When sizing your pneumatic setup, stepping down to the 50 mm bore yields 981.8 N push at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N push at 0.5 MPa. This 63 mm model sits perfectly in the middle for medium-force tasks.
Remember that a standard compact cylinder does not hold its load if air pressure drops or the valve centers; the rod will drift, and the fixed NBR bumper only decelerates near the stroke end. For fail-safe positioning, add an external rod lock or pilot-operated check valve. To order, confirm the 63 mm bore, 60 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and the integrated magnet.
Quick checklist
This 63 mm bore cylinder generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. The maximum standard stroke available for this bore is 100 mm.
It uses a fixed NBR elastomer bumper at each end to absorb shocks; it is not an adjustable air cushion. If operating at high speeds, use an external shock absorber. It does not hold its load on air loss, so an external rod lock is required for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.