
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X60ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 60mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X60ST is a double-acting JIS compact cylinder engineered for space-constrained machinery, delivering a robust 1558.6 N push force at 0.5 MPa. Its integrated C-clip and riveted piston-to-rod architecture drastically reduce overall axial length compared to conventional round-body designs, enabling tighter machine footprints without sacrificing power.
This 63mm bore unit includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic solid-state switches, fitting neatly into the body's peripheral sensor slots. End-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable cushion, meaning high-speed applications may require external shock absorption or a slowed approach. The default female rod end utilizes an M10x1.5 thread for straightforward load coupling. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X60ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Securing machining vices and secondary fixtures on horizontal machining centers where a short 60mm stroke and high 1558.6 N push force are required to lock heavy steel pallets.
Drives mechanical folding arms on high-speed case erectors, utilizing the integrated magnet for position sensing and the compact body to fit within tight transfer gantry clearances.
Acts as a knock-out actuator for plastic injection molds, relying on the NBR bumper to soften the end stop while ejecting finished parts within a 60mm travel range.
When sizing your drive, note that the ACQ63X60ST provides 1558.6 N of extending push at 0.5 MPa. If you need slightly less force, the adjacent 50mm bore yields 981.8 N; stepping up to the 80mm bore provides 2513.2 N. Remember that a standard ACQ body lacks a physical lock, so the rod will drift if air pressure drops or the valve is centered—maintain a fail-safe load hold by adding an external rod lock or a pilot-operated check valve. To order this exact unit, confirm the 63mm bore, 60mm stroke, NPT1/4 port, internal magnet, and the default female M10x1.5 thread.
Quick checklist
This double-acting cylinder delivers 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb shock. It is not an adjustable air cushion, so for high-energy or high-speed cycles you should slow the approach or use an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.