
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X60T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 60mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X60T is a double-acting, single-rod JIS compact cylinder engineered to deliver a robust 1558.6 N push and 1401.5 N pull force at 0.5 MPa. Utilizing a riveted piston-to-rod connection and a C-clip assembly, the short body design significantly reduces axial mounting depth compared to traditional round-body options, making it highly effective for tight machinery footprints.
This specific configuration features a 60 mm stroke, a Ø20 mm piston rod, and a NPT1/4 port. Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. The aluminum body includes magnetic-switch grooves around its circumference, though this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X60T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N push force required to eject dense plastic components from injection molding fixtures without consuming excessive machine depth.
Drives the sealing head on automated packaging lines, utilizing the 60 mm stroke to apply consistent pressure to large corrugated cartons.
Positions and clamps sheet metal blanks in stamping presses, where the fixed NBR bumper absorbs the repetitive end-stop shock of rapid cycling.
When sizing this model, consider stepping down to the Ø50 bore if your application requires less force, which provides 981.8 N of push at 0.5 MPa. Conversely, if you need greater thrust, the Ø80 bore offers 2513.2 N at 0.5 MPa. Keep in mind that a standard ACQ body does not hold its position if air pressure is lost or the valve is centered; the piston will drift, and an external rod lock or pilot-operated check valve is required for fail-safe load holding.
To finalize your order, confirm the essentials: a 63 mm bore, 60 mm stroke, NPT1/4 port, and a female rod-end thread (M10x1.5). Because this unit lacks the -S suffix, it does not include a sensor magnet. If your cycle speeds push the upper limits of the 30-500 mm/s range, supplement the fixed NBR bumper with an external shock absorber to manage kinetic energy.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force reaches 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.
This model uses a fixed NBR elastomer bumper at each end, which is not an adjustable air cushion; for high kinetic energy loads, use an external shock absorber. Additionally, while the body has sensor grooves, this unit lacks the -S magnet, so you must select an -S variant to use AirTAC reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.