
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X70SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 70mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X70SBT is a double-acting JIS compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces overall axial length compared to round-body alternatives, saving valuable mounting depth within tight machinery footprints.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread piston rod end (-B, M18x1.5) that couples directly to your load. The 63 mm bore uses a NPT1/4 port and relies on a fixed NBR elastomer bumper at each end stop to absorb impact energy rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X70SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N extend force needed to securely clamp heavy steel bar material into a CNC lathe chuck, utilizing the male M18x1.5 thread for a solid fixture link.
Strokes 70 mm to push filled cardboard cartons onto a wooden pallet within a compact end-of-line packaging cell where axial mounting space is strictly limited.
Drives an ejection plate on a 200-ton injection molding machine, using the integrated magnet to trigger solid-state switches that confirm the mold has fully opened.
When sizing this 63 mm bore, stepping down to the 50 mm bore yields 981.8 N of push at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N. To confirm the ordering essentials for this exact unit: 63 mm bore, 70 mm stroke, NPT1/4 port, with the -S magnet and -B male M18x1.5 rod thread. Note that a plain ACQ body will not hold a load if air pressure drops or the valve is centred; the piston drifts and the fixed bumper only decelerates near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which cannot be field adjusted like an air cushion. It also lacks a rod lock, so the piston drifts if air is lost; external shock absorbers or a pilot-operated check valve are recommended for high energy or fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.