
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X70ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 70mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X70ST is a double-acting JIS compact cylinder engineered to deliver 1558.6 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to traditional round-body units, saving valuable machine footprint depth.
This 63 mm bore unit features a 20 mm piston rod with a female M10x1.5 end thread. Equipped with the -S option, it includes a built-in magnet for positioning feedback via AirTAC reed or electronic solid-state switches mounted in the body grooves. End-of-travel deceleration relies on fixed NBR elastomer bumpers rather than adjustable air cushions, so external shock absorbers are advised for high-energy cycles. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X70ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the mechanical folding arms on continuous-motion packaging lines, utilizing the 70 mm stroke to snap corrugated carton flaps into position for hot-melt gluing.
Actuates the bar feeder pusher mechanism to load raw bar into CNC turning centers, relying on the 1558.6 N extend force to seat billets firmly against the spindle chuck stops.
Raises and lowers the separator blade in automated pallet magazines, using the compact body depth to fit within tight conveyor stringer gaps while pushing empty pallets into the depalletizing queue.
When sizing this 63 mm bore, stepping down to the 50 mm bore yields 981.8 N of push at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N. The ACQ63X70ST specifies a 70 mm stroke, a NPT1/4 port, the -S magnetic sensor option, and a female M10x1.5 rod thread. Keep in mind that a standard double-acting cylinder drifts if air pressure drops or the valve is centred; the fixed NBR bumper only softens the end stop and does not lock the load. For fail-safe position holding, incorporate an external rod lock or a pilot-operated check valve.
Quick checklist
This 63 mm bore double-acting cylinder generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. The maximum standard stroke available for this bore is 100 mm.
No, the ACQ63X70ST uses fixed NBR elastomer bumpers at the stroke ends rather than an adjustable air cushion. If your cycle speed generates high impact energy, add an external shock absorber. Additionally, this cylinder will drift if air is lost; it cannot hold a load without live pressure, so an external rod lock is required for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.