
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X70T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 70mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X70T is a double-acting JIS compact cylinder engineered to deliver substantial force within a minimal axial footprint. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. By utilizing a riveted piston-to-rod connection and a C-clip body design, this unit achieves a notably shorter overall length compared to standard round-body alternatives, conserving valuable machine depth.
This 63 mm bore model features a 20 mm piston rod and a NPT1/4 port. Deceleration at stroke ends is handled by fixed NBR elastomer bumpers rather than adjustable pneumatic cushions, meaning external shock absorbers should be added for high-energy loads. The body includes grooves for magnetic switches, though this specific configuration ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X70T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N extension force needed to secure heavy machining vices onto CNC pallet changers, utilizing the 70 mm stroke to engage and release tooling plates rapidly.
Drives the folding mechanism on continuous packaging lines, where the short C-clip body depth allows tighter pitch spacing between adjacent sealing heads.
Actuates heavy-duty routing gates on parcel conveyor networks, pushing loaded skids laterally with enough force to overcome carton friction without stalling.
When sizing your pneumatic drive, consider stepping down to the 50 mm bore if your application only requires 981.8 N of push force at 0.5 MPa, or stepping up to the 80 mm bore for a substantial 2513.2 N of thrust. To finalize your ACQ63X70T order, verify the 70 mm stroke, the NPT1/4 port thread, the default female M10x1.5 rod end, and confirm no sensor magnet is required.
Remember that a standard compact air cylinder like this relies entirely on live air pressure to maintain its position. If your mechanism must hold a vertical load safely during an air loss event or when a valve is centered, you must integrate an external rod lock or a pilot-operated check valve, as the internal bumper only decelerates the piston near the end of travel and does not brake or lock the rod.
Quick checklist
The ACQ63X70T double-acting cylinder provides 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, 2182 N of push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at each end to absorb the end stop, which is not an adjustable air cushion. For high-speed or high-energy cycles, add an external shock absorber. Additionally, it does not hold its position if air is lost; the rod will drift, so an external rod lock is required for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.