verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ63X75BLBT

The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X75BLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 75mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ63 mm
  • Stroke75 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM10×1.5 (F) / M18×1.5 (B)
  • ConfigurationStandard compact
$69.29 $76.79Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ63 stroke, mounting and version on one page All ACQ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ63X75BLBT

The AirTAC ACQ63X75BLBT is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial force in tight axial envelopes. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, utilizing a hard-anodized 63 mm bore for extended wear life. Designed with a C-clip and riveted piston-to-rod construction, this short-body format significantly reduces overall machine mounting depth compared to standard round-body units.

This specific configuration includes a male M18x1.5 threaded piston rod end for direct, secure load coupling and an LB mounting bracket for rigid body attachment. The cylinder relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion, meaning high-speed applications may require an external shock absorber. While it ships without a magnetic piston, the body retains sensor grooves for installing position switches if needed later. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ63X75BLBT Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ63X75BLBT
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ63 mm
Stroke75 mm
Acting typeDouble acting
Port sizePT1/4
Rod end threadM10×1.5 female / M18×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ63X75BLBT

ACQJIS compact (thin) double-acting cylinder series.
63Bore size in mm.
×75Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ63X75BLBT Is Used

straighten

Injection Mold Ejection

Provides a compact 75 mm ejection stroke on a plastics injection molding machine, where the short body depth saves valuable mold-base space while delivering 1558.6 N of stripping force.

package_2

Case Erector Flap Folding

Drives the mechanical flap-folding arm on a continuous-motion case erector, utilizing the male M18x1.5 rod thread to secure the folding bracket and cycle at 30-500 mm/s.

factory

CNC Lathe Bar Feeder

Acts as the pusher actuator in an automated bar feed system for a CNC lathe, where the LB bracket rigidly mounts the cylinder body and the 1401.5 N pull force retracts the pusher tube.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ63X75BLBT the Right Cylinder?

When sizing this 63 mm bore actuator, compare its 1558.6 N push at 0.5 MPa against adjacent bores to ensure optimal sizing. Stepping down, the 50 mm bore provides 981.8 N of push force, whereas stepping up to the 80 mm bore yields 2513.2 N. Remember that a standard ACQ body does not hold its position or load when air is lost or the valve is centered; the rod drifts and the fixed NBR bumper only decelerates near the stroke end, so a fail-safe hold requires an external rod lock or pilot-operated check valve. To order this exact unit, confirm the 63 mm bore, 75 mm stroke, NPT1/4 port, male M18x1.5 rod thread, LB bracket, and no magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ63X75BLBT FAQ

This 63 mm bore double-acting cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa at speeds from 30-500 mm/s.

No, the ACQ63X75BLBT uses a fixed NBR elastomer bumper at each end to absorb end-stop impact; it is not an adjustable air cushion, so high-energy cycles may need external shock absorption. Additionally, it does not hold its load if air pressure drops, requiring an external rod lock for fail-safe positioning.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ63X75BLBT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ63X75BLBT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.