
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X75BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 75mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X75BT is a double-acting JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. It provides a 1558.6 N push and 1401.5 N pull at 0.5 MPa, driven through a 20 mm piston rod. The integrated C-clip and riveted body design significantly reduces overall length compared to standard round-body options, making it ideal for tight machine layouts.
This specific configuration includes a male M18x1.5 rod-end thread for direct mechanical coupling to your load. Deceleration is handled by a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, so high-energy cycles may require an external shock absorber. The body features magnetic-switch grooves, though this particular SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X75BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 1558.6 N extension force needed to eject dense plastic parts from injection molding fixtures without consuming excessive press depth.
Actuates heavy-duty diverter arms on logistics conveyors, utilizing the 75 mm stroke to push dense cartons firmly onto adjacent sorting lanes.
Drives secondary clamping mechanisms on CNC lathes where the male M18x1.5 rod end secures custom tooling and the short body fits within the machine envelope.
Selecting this 63 mm bore involves balancing your force requirements with spatial constraints. If you need less force, stepping down to the 50 mm bore yields 981.8 N of push at 0.5 MPa. Conversely, moving up to the 80 mm bore provides 2513.2 N of push. This model features a 75 mm stroke, a NPT1/4 port, and a male M18x1.5 rod thread.
Keep in mind that a standard double-acting cylinder does not inherently hold its position if air pressure is lost or the valve is centered; the rod will drift. If your application demands fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force reaches 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb impact, which is not an adjustable air cushion. If your cycle speeds generate high kinetic energy, you should add an external shock absorber. Additionally, it does not hold its load if air is lost; the rod drifts, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.