
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X75SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 75mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X75SBT is a double-acting JIS compact cylinder engineered around a short C-clip and riveted piston-to-rod body, saving substantial axial mounting depth compared to round-body units. Delivering 1558.6 N of push force at 0.5 MPa, it incorporates a built-in piston magnet for position sensing alongside a male-thread M18x1.5 piston rod end that couples directly to your load.
This 63 mm bore unit features a 20 mm rod, a NPT1/4 port, and a 75 mm stroke. Instead of an adjustable air cushion, it relies on fixed NBR elastomer bumpers at each end to absorb end-stop impact. The hard-anodized inner bore and integrated magnetic-switch grooves around the body ensure durability and straightforward sensor mounting. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X75SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 1558.6 N of extension force to secure heavy cast iron engine blocks during high-speed CNC milling operations.
Utilizes the 75 mm stroke and male M18x1.5 rod to positively index heavy corrugated shipping cartons onto a wrapping station.
Cycles at 30-500 mm/s to reliably strip finished plastic automotive interior panels from injection molding tooling.
When sizing this 63 mm model, evaluate your thrust requirements against neighboring bores. Stepping down, the 50 mm variant yields 981.8 N of push at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N. To order this exact unit, confirm the 63 mm bore, 75 mm stroke, NPT1/4 port, the S magnet for sensing, and the B male-thread rod end.
Note that a standard compact cylinder like the ACQ does not hold its position if air pressure drops or the control valve centers; the piston will drift, and the fixed bumper only decelerates it near stroke end. If your application requires fail-safe load holding, incorporate an external rod lock or a pilot-operated check valve.
Quick checklist
This 63 mm bore double-acting cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa at speeds of 30-500 mm/s.
No adjustable air cushion exists; it uses fixed NBR elastomer bumpers at the stroke ends. For high energy cycles, add an external shock absorber. Additionally, it will not hold a load unpowered; you need an external rod lock for fail-safe holding. The S option provides a magnet compatible with reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.