
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X75T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 75mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X75T is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It delivers 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, utilizing a 63 mm bore and 75 mm stroke. A short C-clip and riveted piston-to-rod assembly drastically reduce overall depth compared to traditional round-body units, making it ideal for tight machine layouts.
This specific configuration features a 20 mm piston rod with a standard female M10x1.5 thread. Deceleration at the stroke extremes relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed operations may require external shock absorption. While the body includes grooves for magnetic switches, this model ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X75T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 1558.6 N extension force needed to positively push plastic injection molded parts off the core before the robotic picker engages.
Drives the mechanical arms on continuous motion case packers, utilizing the 75 mm stroke to fold heavy corrugated flaps prior to hot melt sealing.
Secures lower stamping dies into the press bed, using the compact body depth to fit within cramped sub-plate machinery without obstructing the strip feed.
When sizing your drive, consider stepping down to the 50 mm bore (981.8 N push at 0.5 MPa) for lighter duties, or moving up to the 80 mm bore (2513.2 N push at 0.5 MPa) for heavier loads. Ensure your ordering essentials include the 63 mm bore, 75 mm stroke, NPT1/4 port, female rod thread, and no magnet.
Note that a standard ACQ body does not hold its position if air pressure drops or the valve is centered; the rod will drift. If your application requires fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
This double-acting cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa at speeds of 30-500 mm/s.
The cylinder uses a fixed NBR elastomer bumper at each end, not an adjustable air cushion, so high energy cycles need external shock absorbers. Additionally, this model lacks the internal magnet for switches; you must specify an ACQ63X75S variant to utilize the body's sensor grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.