
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X80BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 80mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X80BT is a double-acting JIS compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to standard round-body units, freeing up valuable machine footprint in tight assemblies.
This specific configuration includes a male-thread M18x1.5 piston rod end (Ø20 mm) that couples directly to tooling, alongside a NPT1/4 port. It relies on a fixed NBR elastomer bumper at each end for end-stop deceleration rather than an adjustable air cushion, meaning external shock absorbers should be added for high-energy loads. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X80BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N push force at 0.5 MPa needed to positively fold and seal heavy cardboard flaps on continuous motion packaging lines.
Utilizes the male M18x1.5 rod end to securely attach vacuum cups for pulling rigid plastic parts out of hot injection molding tools.
Drives adjustable back-gauges or light tooling stops on metal forming presses, benefiting from the short C-clip body to maximize floor space.
When sizing your actuator, stepping down to the 50 mm bore yields 981.8 N of push at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N. The 80 mm stroke sits well within the 100 mm maximum standard stroke for this 63 mm bore. To finalize an order, confirm the 63 mm bore, 80 mm stroke, NPT1/4 port, and the male M18x1.5 rod thread. Note that a plain ACQ body does not hold its position if air pressure is lost; the piston drifts and the fixed bumper only decelerates it near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe load holding.
Quick checklist
This double-acting cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. The operating speed range is 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end, not a field-adjustable air cushion, so you must slow the approach or add external shock absorbers for high energy. It also does not hold its load on air loss; the rod drifts, requiring an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.